Home > Products >

  RVibrake2 Auxiliary Braking System
RVibrake2 Auxiliary Braking System RVi2


 
More Views:


RVibrake2 Auxiliary Braking System is the most advanced and easiest to use auxiliary braking system on the market. The Towing Law requires that a tow vehicle have a braking system when RV towing a car with a Tow Bar or A-Frame system.

Designed with a unique "One-Touch Auto Positioning" technology that allows for a perfect installation in your tow vehicle every time.

Installation takes less than 60 seconds, and is compatible with RVibrake's Tire Pressure Sensors.
*Breakaway System and Wireless Monitor Included



RVibrake2*:
RVibrake2 only [$1,150.00]
RVi2/TPMS combo (Save $25) [$1,375.00]
RVi2 + TPMS + Towed Battery Charger (Save $50) [$1,400.00]

Description Technical Specs Installation Video
 

Thin and light design

RVibrake2 is the smallest and easiest to use auxiliary braking system on the market. Unlike other portable braking systems, RVibrake2's housing pushes against the floor pan (the rise in the floor where the driver’s seat is mounted) in the tow vehicle instead of the soft seat when activating. This allowed RVibrake2 to be designed as small as possible making RVibrake2 easy to install and easy to stow. (15% thinner than RVibrake)
RVibrake Dims

One-Touch Auto Positioning

This is truly one of a kind technology. Push the green Auto Position button on RVibrake2’s control panel and watch RVibrake2’s actuator push on the brake pedal, positioning the housing against the seat pan automatically. RVibrake2’s One-Touch Auto Positioning technology allows for a perfect install every time, no guessing if RVibrake2 was installed properly!
RVibrake2 Auto Start

2nd Generation Technology
(2.0 Software)


RF Signal Boost
RVibrake2's new RF Signal Boost software now gives you greater RF communication. RF is restricted by the FCC
Tire Pressure Sensors
RVibrake Tire Pressure Sensors are the easiest to use tire pressure sensors available. Simply enable the sensors on RVibrake2's Wireless Monitor, thread them onto the towed vehicle's tire stems, and you’re ready to go! (sensors sold separately)
Battery Protection
Built upon RVibrake's 1.0 software battery monitoring, RVibrake2 monitors your towed vehicle's battery voltage output as well as RVibrake2's draw on the towed vehicle's battery.

Truly proportional

RVibrake is the only portable braking system that is truly proportional, because it pushes against the solid floorpan an not the seat cushion. The harder you brake in the motorhome the harder RVibrake2 pushes on the brake pedal of your towed vehicle. RVibrake2's proportional technology provides smooth operation in moderate braking, or panic braking situations

Wireless Monitor
The Wireless Monitor will allow you to make adjustments to RVibrake2's settings while traveling, as well as monitor performance.

Features include:
• Bar graph display of when the towed vehicle is braking
• Manual Brake Test activation
• Towed Vehicle low battery indication
• Audible Break-Away alert
• Tire Pressures (When enabled)

Lightning Fast Installation
60 second installation

1) Attach the brake pedal clevis onto the brake pedal
2) Plug the power cord into the towed vehicle's 12-volt outlet
3) Press the Auto Position button on the control panel
4) RVibrake2's adjustable actuator will push on the pedal,
moving the housing into the same position every install.








Average Rating: 4.5 of 5 | Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
 
RVibrake2 March 29, 2015
Reviewer: Paul Rummler from Redondo Beach, CA United States  
I had a question about the installation, made a phone call and problem solved.  Customer service was excellent.  I have only used this one time but it installed easily and worked as predicted.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
RVibrake2 and Customer service March 27, 2015
Reviewer: Greg C from Southern Ca.  
Before I purchased this system I spent a great deal of time talking with SAM in their Tech support group We determined that the best choice for the remote was the cable/extension plug option vs the direct plug from the back of the remote display. Additionally, Sam and I exchange snapshots of my floorboards of my 1993 Jeep Grand Ch. which has a hump right where the RV2 would need to  lay flat (it needed something to move the RV2 forward a couple of inches so it could lay flat). Sam and his team were great and made up a special floor mount bar based on the pictures and my measurements that attached  to the seat mounting bolts to create a stop plate beyond the hump to solve the problem at no charge!
I cannot say enough how helpful Sam was and how great the system works! No problems. and I love the fact that is shows a real time graft bar display when the brakes are being applied to the soft or hardest of the braking. I am thinking about buying the tire pressure sensors next.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
safe & simple to use March 15, 2015
Reviewer: Donald Church from Baton Rouge, LA United States  
For a 1st time RV'er, it was easy to set up and use. Great piece of mind while towing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Product February 3, 2015
Reviewer: Marv White from Golden, CO  
I bought the RVi Brake system in 2012 when I replaced my 04 Odyssey tow vehicle w/ our 2012 Explorer. I wanted a non-invasive break system ( I had a SMI brake system in my Odyssey). The guys @ RVi worked w/ me on the installation and operation process and have shown me what great customer service is all about. Great product, great customer service!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rvibrake2 December 1, 2014
Reviewer: John Miller from KnoxvilleTn  
Towed over 20k with no problem. Easy setup. Great people to work with. Great system.

Was this review helpful to you?

View All Customer Reviews